2008 Kobelco CK1000-II 100 ton Crawler Crane
100 Ton Capacity
Hino Engine
Two Winches
Front and Rear Drum: 53,000 lbs Line Pull 28 mm (1-1/8”) Wire Rope
Working weight Approx. 179,700 lbs (81,500 kg)
Ground bearing pressure Approx. 11.0 psi (75.6 kPa)
66 shoes, 36” (914 mm) wide each crawler
Front and Rear Drums: powered by hydraulic motor through planetary reducer. Drum 24.4” (620 mm) P.C.D. X 24.3” (616 mm) LG. Grooved for 1-1/8” (28 mm) diameter wire rope
Operator’s Cab: fully enclosed in safety glass, auxiliary controls and instruments on side mounted console, signal horn, windshield wipers and air conditioner
Electric System: all wiring corded for easy servicing, individual fused branch circuit
Engine;
4.1 Power plant Diesel engine, make and model Hino P11C-UN (Comply with EPA “Tier 3”)
No. of cylinders 6
Bore X stroke 4-13/32” X 5-29/32” (122 mm X 150 mm)
Cycles 4
Total displacement 642 cu.in (10,520 cm3)
Rated output SAE GROSS 331 HP / 2,000 rpm (247 kW / 2,000 min-1)
Maximum torque 959 lbs-ft / 1,500 rpm (1,300 Nm / 1,500 min-1)
Starter 24 Volts / 6.0 kW
Alternator 24 Volts / 50 Amp
Batteries Two 12 volt, 136 AH capacity series connected
Radiator Corrugated type core, thermostatically controlled
Throttle Twist grip type hand throttle, electrically controlled
Air cleaner Dry type with replaceable paper element.
Fuel tank capacity 106 US gal. (400 liters)
Lube oil filter Full flow and by-pass type with spin off type cartridge
Fuel filter Heavy duty with spin off type cartridge
Approximate fuel consumption 0.362 lb / HP-hr (220 g / kW-hr) 17.3 US gal. / hr at 100 % HP