Please register or log in.

Link-Belt

1990 Link-Belt HC-268, 2 winches, Cummins power
Liebherr

Power: Liebherr Winches: 2 Year: 2007
Liebherr

Power: Liebherr Winches: 2 Year: 2001
2007 Genie 1056
<b> 2007 Genie 1056 </b> <ui> <li> 5 ton capacity </li> <li> 56' boom </li> <li> Call for more details </li> </ui>
American
Power: Cummins Winches: 3 Year: 2005
Kobelco
Power: Hinno Winches: 2 Year: 2009
American

2009 American HC110. Available now! Cummins engine, 2 winches.
American

Power: Cummins Winches 2 Year: 2004
Kobelco

 

2008 Kobelco CK1000-II 100 ton Crawler Crane

  • 100 Ton Capacity
  • Hino Engine
  • Two Winches
  • Front and Rear Drum: 53,000 lbs Line Pull 28 mm (1-1/8”) Wire Rope
  • Working weight Approx. 179,700 lbs (81,500 kg)
  • Ground bearing pressure Approx. 11.0 psi (75.6 kPa)
  • 66 shoes, 36” (914 mm) wide each crawler
  • Front and Rear Drums: powered by hydraulic motor through planetary reducer. Drum 24.4” (620 mm) P.C.D. X 24.3” (616 mm) LG. Grooved for 1-1/8” (28 mm) diameter wire rope
  • Operator’s Cab: fully enclosed in safety glass, auxiliary controls and instruments on side mounted console, signal horn, windshield wipers and air conditioner
  • Electric System: all wiring corded for easy servicing, individual fused branch circuit
    Engine;
  • 4.1 Power plant Diesel engine, make and model Hino P11C-UN (Comply with EPA “Tier 3”)
  • No. of cylinders 6
  • Bore X stroke 4-13/32” X 5-29/32” (122 mm X 150 mm)
  • Cycles 4
  • Total displacement 642 cu.in (10,520 cm3)
  • Rated output SAE GROSS 331 HP / 2,000 rpm (247 kW / 2,000 min-1)
  • Maximum torque 959 lbs-ft / 1,500 rpm (1,300 Nm / 1,500 min-1)
  • Starter 24 Volts / 6.0 kW
  • Alternator 24 Volts / 50 Amp
  • Batteries Two 12 volt, 136 AH capacity series connected
  • Radiator Corrugated type core, thermostatically controlled
  • Throttle Twist grip type hand throttle, electrically controlled
  • Air cleaner Dry type with replaceable paper element.
  • Fuel tank capacity 106 US gal. (400 liters)
  • Lube oil filter Full flow and by-pass type with spin off type cartridge
  • Fuel filter Heavy duty with spin off type cartridge
  • Approximate fuel consumption 0.362 lb / HP-hr (220 g / kW-hr) 17.3 US gal. / hr at 100 % HP

    • Kobelco

    Power: Hinno 3 Winches Year: 2009
    Advertisements in this category Notify me when new ads are submitted in this category
      Owner ascendingdescending Manufacturer ascendingdescending Model ascendingdescending Year ascendingdescending Capacity ascendingdescending Price State Picture
    add to favorites bigge Link-Belt HC-268 1990 250 700000 California

    1990 Link-Belt HC-268, 2 winches, Cummins power
    add to favorites bigge Link-Belt HC-278HII 2007 300 $2,200,000 California
    2007 Link-Belt HC-278H II 300 Ton Lattice Boom Truck Crane
    • 404’ max tip height, 320’ max 360º working radius.
    • Maximum luffing jib attachment length: Luffing Boom – 200’ Luffing Jib – 200’ Fixed Jib – 30’
    • 432’ Max Luffing Attachment Working Height
    • Height – 10’ 5.75”
    • Width – 11’ 10”
    • Length – 44’ 3.75”
    • 24’ Wheel Base
    • Upper Engine – 515 hp
    • Lower Engine – 430 hp
    • Outrigger Spread – 24’ 6”
    • Outrigger Base – 24’ 6”
    • 50,103lbs Max Winch Line Pull
    • 494 ft/min Max Winch Line Speed
    add to favorites firstcoastcranes American 5300 70 Tons Call Flordia
    Cummings Diesel with torque convertor, Independent swing and travel, Third Drum. 36" Pads, Hyd side frames Machine Located in Jacksonville, FL