Crane Connection - Item details

Please register or log in.

Terex

2010 Terex RT130 Available Now!

130 Ton Capacity
155' Main Boom
29' - 72' Jib
Cummins Engine
Two Winches

American

Power: Cummins 2 Winches Year: 2009

American

Power: Cummins Winches: 3 Year: 2005

Link-Belt

2007 Link-Belt HC-278H II 300 Ton Lattice Boom Truck Crane

404’ max tip height, 320’ max 360º working radius.
Maximum luffing jib attachment length: Luffing Boom – 200’ Luffing Jib – 200’ Fixed Jib – 30’
432’ Max Luffing Attachment Working Height
Height – 10’ 5.75”
Width – 11’ 10”
Length – 44’ 3.75”
24’ Wheel Base
Upper Engine – 515 hp
Lower Engine – 430 hp
Outrigger Spread – 24’ 6”
Outrigger Base – 24’ 6”
50,103lbs Max Winch Line Pull
494 ft/min Max Winch Line Speed

Liebherr

Available now! 2010 Liebherr LR1300 Crawler Crane.

330 Ton Cap
203 ft boom
Liebherr engine
2 winches
47,400lb line pull
453’ per min rope speed
Track shoes 47.2” wide
220,500lb hook block
35,300lb ball
3 sheaves

Call for more details.

Link-Belt

Detroit Ser. 60, 3,000 hrs on rebuild, 16,000# cwt., 75% tires, auxiliary winch, block & ball.

1999 Broderson IC80 Carry Deck Crane Available Now!

8 ton capacity
42' boom
10' jib
Diesel engine
1 winch

Call Bigge for more details!

Link-Belt

1997 Link-Belt HTC-8675

2 winches
2 piece jib
Detroit power

Kobelco

2008 Kobelco CK850-II

Working Speed

Hoist line speed (front and rear drum): 390 ~ 10 ft/min (120 ~ 3m/min)
Lowering line speed (front and rear drum): 390 ~ 10 ft/min (120 ~ 3 m/min)
Boom hoist line speed: 230 ~ 7 ft/min (70 ~ 2 m/min)
Boom lowering line speed: 230 ~ 7 ft/min (70 ~ 2 m/min)
Swing speed: 4.0 rpm (4.0 min-1)

Operator's Cab

Fully enclosed, full-vision cab with safety glass all around
Auxiliary controls and instruments on side mounted console
Signal horn, windshield wipers, air conditioner

Hydraulic system

Maximum pressure rating: 4,620 psi (32.0 MPa)
Cooling: Oil to air heat exchanger
Filtration: Full flow filters with replaceable paper elements
Reservoir capacity: 116 US gal. (440 liters)

Crawler shoes

63 shoes, 36” (914 mm) wide each crawler

Engine

Diesel engine, make and model: Hino J08E-TM (Comply with EPA “Tier 3”)
No. of cylinders: 6
Bore X stroke: 4-13/32” X 5-1/8” (112 mm X 130 mm)
Cycles: 4 Total displacement: 469 cu.in (7,684 cm3)
Rated output SAE GROSS: 213 HP / 2,000 rpm (159 kW / 2,000 min-1)
Maximum torque: 588 lbs-ft / 1,600 rpm (797 Nm / 1,600 min-1)
Starter: 24 Volts / 5.0 kW Alternator: 24 Volts / 60 Amp Batteries: Two 12 volt, 136 AH capacity series connected
Radiator: Corrugated type core, thermostatically controlled
Throttle: Twist grip type hand throttle, electrically controlle.
Air cleaner: Dry type with replaceable paper element Fuel tank capacity: 106 US gal. (400 liters)
Lube oil filter: Full flow and by-pass type with spin off type cartridge
Fuel filter: Heavy duty with spin off type cartridge
Approximate fuel consumption: 0.342 lb / HP-hr (208 g / kW-hr) 10.53 US gal. / hr at 100 % HP

Front and Rear Drums

Powered by hydraulic motor through planetary reducer
Drum 21.7” (550 mm) P.C.D. X 21.5” (545 mm) LG
Grooved for 7/8” (22 mm) dia. wire rope
Spring set, hydraulically-released, multiple-disc holding brake mounted inside hoist motor- operated through a counter-balance valve. An external ratchet is fitted for locking the drum.
Free-Fall (Standard)- Wet-type disk brake free-fall is mounted inside the drum.

P&H

Cummins 855 Diesels, 15 speed RR Trans., 220' Boom, Heavy Duty Boom Tip, 80' Jib, 30' Mast for max boom & jib, Power Load Lowering - 2 Drums, 2,598 hours in lower, 1,307 miles on carrier, 4,755 hours in upper, front bumper cwt., LMI & A2B, 150 ton block, 35 ton block, 10 ton ball, all manuals and records. Well maintained, one owner, plant maintainance crane. 14:00x24 Tires,

Item details add to favorites